STAGE 2 SYSTEM - SPRINTER 2WD (2007+ 2500 ONLY) by VAN COMPASS, NO STRUTS
STAGE 2 SYSTEM - SPRINTER 2WD (2007+ 2500 ONLY) by VAN COMPASS, NO STRUTS
SKU:7189-LM-NS
Stage 2 System Benefits:
- VC tuned Falcon 3.3 Adjustable rear shocks with 10 intuitive firmness settings
- Enhanced cornering stability and reduced wind sway
- More effective control over large and small bumps
- Improved handling feel on rough roads and broken pavement
- Increased bottom out resistance
- 100% bolt on
Intended Use:
- Lightweight adventure vans below GVWR
- Passenger vans
Customers looking for maximum handling flexibility from their vans, need look no further than our 2WD Stage 2 system. Whether you are looking for maximum stability in highway travel and treacherous wind conditions, or maximum compliance off pavement, we're able to minimize side to side sway and balance out jarring impacts using our deep knowledge of suspension tuning.
The cornerstone of our Stage 2 kit is the fully adjustable Falcon 3.3 Fast Adjust Shocks with their huge range of compression adjustment available at the simple flip of a large, easily accessed Fast Adjust knob. This allows you to quickly adjust from the softest to firmest settings over a significantly larger range than the competition's smaller adjusters. A larger range of adjustment means the shocks are more effective and adaptable to multiple modes of use.
Our progressive foam Bump Buddy replacement jounce bumpers replace your hard factory rubber bump stops, adding improved spring curve progression, reducing sway, and increasing bottom out resistance without any unnecessary clunking or harshness.
This is a great kit for light weight adventure vans, work vans and any van that sees a wide range of payload and terrain. Vans that are near the gross vehicle weight rating (GVWR) may want to add additional rear suspension parts to reduce rear suspension sag and improve stability.
Collapsible content
INCLUDED COMPONENTS
- Front Falcon Bump Buddies Jounce Bumpers (pair)
- Falcon 3.3 SP2 Fast Adjust rear shocks **custom tuned to the weight of your van for 2500 applications**
- Dust boots for rear shocks
FITMENT GUIDE
MODEL: SPRINTER 2500
YEAR: 2007-PRESENT
DRIVE TYPE: 2WD
>>COMPLETE WHEEL AND TIRE FITMENT GUIDE<<
>>DON'T KNOW YOUR VANS WEIGHT? USE THE CAT SCALE LOCATOR<<
LABOR TIMES
Recommended Shop Labor Time: 2 Hours
Killer addition. Added these and the front rally struts and it made a huge difference on rough roads in Colorado.
Having fitted the shocks to the van project it now drives with a much improved stability, even on twisty road. It’s surprising how much difference they make.
The hardest part of the 45 min install (on the driveway) is compressing the new shocks to allow fitment into the lower mount, I used a thin ratchet strap, which worked well to hold the shock compressed to get the lower bolt in place.
when building your van. Handling is night and day compared to the stock set up. I drove through some winding mountain road here in SoCal and my ‘20 144 2wd sprinter handle the road like a champ. At the camp site, I was able to adjust the shocks to 1 so going over the dips and bumps was comfortable. I also installed a set of bilstein b6 struts so keep that in mind because it important to address the front. Btw, fully loaded my van weighs about 7000 -7200 lbs.
thanks for the great products!
Gabe